Standard PCB Product Line
FlexLink offers a complete line of PCB handling units which incorporate standard assembly features throughout the product range.  All modules have ESD safe designs and are CE marked.  The complete product range utilizes a patent pending modular "open transfer" rail system connected to a precision guided width adjustment system.  The "open transfer" belt drive system eliminates shafts and bellows by incorporating a dual motor, ESD safe belt system.  This rail/width adjust system serves as the base platform for all products.  The flexibility and quality of this system allows FlexLink to offer the most technically advanced conveyor platforms in the business.
 

High Speed Rotate Mechanism Inverts Boards with Pinpoint Accuracy
The model F1100 Board Inverter is used to invert a PC board when required in top-side/bottom-side manufacturing.  The unit uses a servo controlled high-speed rotate mechanism to invert the board with pinpoint accuracy.  It is able to cradle the board during its rotate cycle by using a two-sided belt support system.  The module is able to achieve cycle time of less than 8 seconds per board by utilizing its "flip-flip" software functions.
 

High-capacity Servo Controlled FIFO/LIFO Buffer
The model F1200 FIFO/LIFO Buffer utilizes a high-speed servo control system, which accurately positions the carriage for precise transfers.  The FIFO/LIFO uses a revolutionary transport system that simplifies the storage of PC boards.  This new system totally eliminates the need for pushers, pullers, and belted carriage assemblies.  The FIFO/LIFO incorporates a user-friendly touch screen interface that displays real-time event messages.
 

Four Function Buffering Unit
The model F1200C FIFO/LIFO/Unloader/Loader can be set up to run in four different mode configurations.  This highly flexible unit is used in applications where a multi-tasking module is required.  It can be programmed to function as a FIFO buffer, LIFO buffer, Magazine Unloader, or a Magazine loader.  The change over time from one mode to another can be accomplished in less than one minute.  There are no hardware changes required when changing between modes on this model.  All mode selections are entered using the user friendly touch screen display.  The unit comes equipped with a high-speed servo control system and utilizes FlexLink's "Active Alert" software.  This unique software structure constantly monitors all system functions and will alert the operator if any potential errors are found.